Original Build with Options & Upgrades

• Zooming and pivoting video camera in the engine room (Panasonic system)
• Fixed video cameras on both aft side decks, in direction of the forward area. Position as per lighting plan Ipad to monitor the cameras
• Panasonic WV-SW458 (360°) camera in the aft cockpit in lieu of the fixed camera
• Panasonic WV-SW458 (360°) camera to be recessed as much as possible (more than on 84-19) Humphree intruders (Atos version)
• CMC Electric stabilizers
• Hydraulic bow thruster
• 2x upgraded water heaters (100lt each)
• Additional soundproof insulation between the salon and engine room
• Additional soundproof insulation between the master cabin and engine room
• Polished stainless steel anchor in lieu of std
• 125 metres anchor chain
• Watermaker predisposition
• Watermaker remote control panel installed in the crew mess area
• 130 l/h (34 gals/h) Idromar watermaker
• Class S propellers
• Propellers to be S&S 5 blades as per 84-21
• Single waterline, color: custom Palinal G936.
• Handrails on the side deck to be higher
• Repositioning of the std side boarding gates: to be moved aft, between the howseholes 
• 22 underwater lights: *5 under the swim platform: THX1201 model - WHITE LIGHT, *8 on each side: TIX301 model- WHITE LIGHT, one additional light under the swim platform (6 in total) THX1201 model - WHITE LIGHT 
• All the lights to be connected to one switch in the aft deck + second switch in the master cabin. Position as per lighting plan 
• 4x chairs in Royal Botania Ninix NNX 55 (teak with structure in brushed stainless steel)
• An additional pair of midship cleats placed on the bulwark in the fwd area
• The position of the fwd side boarding gates as per 84-19
• All external tables to be in teak as per Benetti sample, 20% gloss 
• Move the side navigation lights from their std position to the base of the arch. 
• Replace the std side navigation light with upgraded ones with a low profile (Lopolight 300-001 and Lopolight 300-002) 
• Additional soundproof insulation between the master cabin and dining area/galley 
• No logo on the antennas 
• No logo on the helm seats 
• Logo on the seats to be the same color as the leather 
• Additional insulation on the fwd bulkhead in master cabin 
• Additional insulation on engines room vent boxes in the salon 
• Gutters for chain locker hatches 
• Upgraded steering system 
• Bigger rudders to improve maneuverability at lower speeds 
• ONAN generators (EPA Tier 3 compliant) in lieu of std Kholer 
• Install a permanent marker (14 stainless steel triangles) on the hull for the position of the straps as per docking plan 
• Std aft shower to be repositioned on the starboard side locker next to the swim platform 
• Fwd area breakfast table in lieu of std coffee tables. Dimensions: leave 6" of a gap between the table and the fiberglass settee 
• Bases of the umbrella inside the bases of the table
• Side lockers beside the bow sitting area
• Hooks for mooring lines in the chain locker. Same as 84-20
• Separate removable section of the fwd sun-pad area above the escape hatch of the
• VIP cabin Aft Salon access door to open from starboard side to portside
• Delete the std bar cabinet. Install the bar cabinet of the Azimut 88
• Top of the bar cabinet to be in marble
• Stainless steel pole for 32" TV + TV predisposition
• Storage locker on the starboard side under the stairs to the flybridge