Overview

Sequentis represents an extremely customized 2019 43' Jupiter built as project 007, with no expense spared in her construction or design. Built to be towed behind the owner’s mothership and carry all tackle and tools needed to cruise and fish at high capacity. The vessel is equipped with seakeeper, watermaker, and icemaker along with an outdoor kitchen complete with sink, grill and refrigerated drink box.

Sequentis is constructed with a carbon fiber laminate and all decks are finished in teak. All gunnels have been faired underneath and finished before assembly. The cockpit comes complete with a Release Marine Rocket launcher, two 60-gallon live wells which can convert to four tuna tubes. Fold-down port and starboard seats are located on each side of the livewell. Port and starboard fully macerated fish boxes are also located in the cockpit, the icemaker dumping into the port side box. 

Aft of the helm is the outdoor kitchen which, when the lid is down, can convert to extra seating for crew and guests. Forward you will find wrap-around seating, a removable custom teak table, in deck custom dive tank/storage, and also custom port and starboard Release Marine built-in rocket launchers. A livewell for extra bait storage is located under the forward seating. Moving aft, you have a chaise lounge for two located forward of the helm. The helm is air conditioned and consists of 3 x 22” Garmin touchscreen monitors, two Miya Epoch teaser reels in the built-in overhead compartment, and three Release Marine helm chairs. The vessel is one-of-a-kind and in excellent condition. 

Key Features

• Powered by Triple Yamaha XTO 425hp, 800 hours (Aug 2023)

• Kohler 14kW diesel generator, 860 hours (Aug 2023)

• Seakeeper 6, 615 hours (Aug 2023)

• Blue Water watermaker

• Dometic icemaker

• Bow Thruster

• Release Marine Helm Chairs

• Custom Garmin Electronics Package including 3 x 22” touchscreens

• Custom Tuna Tower

Hull

• Custom Flag blue hull 

• Painted hull stripe white/silver

• Deck mechanically fastened and fiberglass bonded to hull

• Vacuum-infused vinyl ester construction

• Hi-tech composite PVC foam coring

• Inner liner integrally bonded to hull

• No wood/no rot laminated design

• Posi-stern™ hull pad design

• Foam-filled fiberglass uni-grid stringer system

• LED Seablaze underwater lights 

• Bow thruster

• Seakeeper gyro stabilizer

• Reverso engine flush

• Custom towing bit

• 3kW transducer

Deck

• Wiring for pair of electric reels

• Gunwale mounted rod holders (3 pairs)

• Hybrid forward seating with removable backrests

• 360-degree coaming pads

• Lenco stainless steel 14x18 trim tabs with indicator switch, recessed

• Bilge pump with automatic float switches (3)

• Pull up bow cleats

• Springline and cockpit cleats with hawsepipes

• Stainless steel hardware thru-bolted with nylon lock nuts

• Molded non-skid horizontal surfaces

• Transom twin baitwells with folding stern seats

• Aquarium window on livewell

• (4) Removable tuna tubes in aft baitwells

• Full beam seachest with 2" plumbing

• Thru stem bow roller with anchor windlass in forward deck anchor locker with remote switch, chain, rope, anchor, and freshwater wash down

• Stainless steel scuppers

• Insulated illuminated 420-quart port & starboard fish boxes

• Icemaker to dump into port fishbox

• Watermaker

• Livewell pump, HD 1600 gph

• Saltwater wash down and livewell plumbing

• (12) Stainless steel rod holders 

• In floor bow storage locker, 680-quart

• Custom pressurized bow baitwell

• Dive tank storage in floor forward

• 75-gallon freshwater system with (2) wash downs & transom shower

• Port and starboard dive doors with removable folding ladder

• Forward seating with permanent backrests with teak top and rod holders

• Prep center with mezzanine seating, drink box and grill

• Release 9-hole teak cockpit rocket launcher w/offset pedestal

• Release marine bow table

• 50-amp 110/220 dockside power with 50' chord

Hardtop

• Spray curtain enclosure

• Flat black paint underside of hardtop

• Electronics box, overhead molded fiberglass

• Lumitec Mirage spectrum lighting in hardtop and (6) rod holders

• Underside of hardtop accommodates Miya Epoch US 9 teaser reels

• Gem outrigger bases with 22’ carbon poles

• Custom tuna tower

Cockpit

• Triple release marine teak ladder back helm chairs

• Diamond stitching and piping on seating

• A/C helm vents

• Release marine cup holders

• Frame-less fiberglass integrated console door

• Edson black wheel with power knob

• White powder coat package

• Recessed comfort footrest

• Custom Garmin electronics package 

• Richie black face Supersport compass

• Helm master

• Yamaha CL7 touchscreen display

• Breaker electrical system

• Battery system with switches and (8) HD AGM batteries

• (2) Battery chargers

• Flir M324CS camera

• JL audio stereo package

• Pro curve glass windshield

• Glove boxes with fiberglass lid

• USB charging ports

• Cockpit lighting, white

• Teak cockpit sole including forward seating area

Custom Tuna Tower

• 7616 Garmin

• Trim tab switch centered under steering helm

• Helm master joystick outboard of control - starboard side

• Twin VHF command mic in tower

Cabin

• Premium interior decor package - Rockport

• Tackle locker

• Stand-up head compartment with teak decor and hot water shower

• Separate vanity with quartz counter-top, vessel sink with pressurized hot and cold water, mirror, and cabinet storage

• Electric porcelain head with 15-gallon holding tank and macerator

• Tankless hot water heater

• (2) Towel racks

• GFI 110v outlet

• 8,000 BTU air conditioning

• Nicely styled seating area/twin berth

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.